Drained and Undrained Poroelastic Properties of Healthy and Pathological Bone: A Poro-Micromechanical Investigation

Poro-micromechanics allows for the quantification of poroelastic properties such as the Biot and Skempton coefficients, once a continuum micromechanics model for the material under consideration has been developed and validated. Employing such a model for the transversely isotropic elasticity of cortical and trabecular bone, we determine the tensors of Biot and Skempton coefficients as functions of the volume fractions of mineral, collagen, and the micropore space (Haversian and Volkmann canals, and the inter-trabecular space). Increase of microporosity, as experienced in osteoporosis, as well as decrease of mineral content, as experienced in osteomalacia, lead to an increase of Biot and Skempton coefficients, i. e. to magnification of the mechanical role of the marrow filling the micropore space. For quantification of the marrow pressure rise upon downfall, undrained conditions are appropriate, as can be shown by model predictions of non-destructive impact experiments.     

Formation of molten metal films during metal-on-metal slip under extreme interfacial conditions

The present paper describes results of plate-impact pressure-shear friction experiments conducted to study time-resolved growth of molten metal films during dry metal-on-metal slip under extreme interfacial conditions. By employing tribo-pairs comprising hard tool-steel against relatively low melt-point metals such as 7075-T6 aluminum alloys, interfacial friction stress ranging from 100 to and slip speeds of approximately have been generated. These relatively high levels of friction stress combined with high slip-speeds generate conditions conducive for interfacial temperatures to approach the melting point of the lower melt point metal (Al alloy) comprising the tribo-pair.A Lagrangian finite element code is developed to understand the evolution of the thermo-mechanical fields and their relationship to the observed slip response. The code accounts for dynamic effects, heat conduction, contact with friction, and full thermo-mechanical coupling. At temperatures below the melting point the material is described as an isotropic thermally softening elastic-viscoplastic solid. For material elements with temperatures in excess of the melt point a purely Newtonian fluid constitutive model is employed.The results of the hybrid experimental-computational study provides new insights into the thermoelastic-plastic interactions during high speed metal-on-metal slip under extreme interfacial conditions. During the early part of frictional slip the coefficient of kinetic friction is observed to decrease with increasing slip velocity. During the later part transition in interfacial slip occurs from dry metal-on-metal sliding to the formation of molten Al films at the tribo-pair interface. Under these conditions the interfacial resistance approaches the shear strength of the molten aluminum alloy under normal pressures of approximately 1- and shear strain rates of . The results of the study indicate that under these extreme conditions molten aluminum films maintain a shearing resistance as high as .Scanning electron microscopy of the slip surfaces reveal molten aluminum to be smeared on the tribo-pair interface. Knoop hardness measurements in 7075-T6 Al alloy at various depths from the slip interface indicate that the hardness increases approximately linearly with depth and reaches a plateau at approximately from the surface.     

Direct Numerical Simulation of Statistically Stationary One- and Two-Phase Turbulent Combustion: A Turbulent Injection Procedure

A new turbulent injection procedure dedicated to fully compressible direct numerical simulation (DNS) or large eddy simulation (LES) solvers is proposed. To avoid the appearance of spurious acoustic waves, this method is based on an accurate tracking of the turbulent structures crossing the boundary at the inlet of the domain. A finite difference DNS solver has been coupled with a spectral simulation in which a statistically stationary homogeneous turbulence evolves to provide fluctuating boundary conditions.A new turbulence forcing method, dedicated to spectral solvers, has been developed as well to control the major properties of the injected flow (turbulent kinetic energy, dissipation rate and integral length scale). One-dimensional Navier–Stokes characteristic boundary conditions extended to non-stationary flows are coupled with the injection procedure to evaluate is potential in four various configurations: spatially decaying turbulence, dispersion of vaporizing sprays, propagation of one- and two-phase V-shape turbulent flames.     

全断面隧道掘进机分类及其应用范围(英文)

目前,隧道掘进机的机械化及自动化水平得到了很大提高,隧道掘进机可以开挖不同的地质条件下各种形状的隧道。隧道掘进机的类型也越来越多,根据隧道工程场地所处的水文地质与工程地质条件,工程的使用特性及环境的限制,不同类型的隧道掘进机的工作机理需要进一步的理解并依此进行分类,以便选择合适的隧道掘进机。本文介绍了各种类型的全断面隧道掘进机的运行机理,并根据最终开挖隧道断面,掌子面的支护类型及岩土体的破碎机理对全断面隧道掘进机进行分类。本文也总结了各类型的隧道掘进机的应用范围。使用者可根据地质条件及特殊需要对隧道掘进机进行初步的选型。     

Dynamics of Geometrically Nonlinear Rods: I. Mechanical Models and Equations of Motion

Slender thread like bodies (like cables, ropes, textilethreads or belts) are often used in technical applications. Becauseof their dimensions the one-dimensional continuum is the appropriatemechanical model for bodies of this type. Making use of the basicrelations of three-dimensional continua as a starting point the paperdevelops the general kinematic and kinetic relations of one-dimensionalcontinua for the case that the cross-sections will remain plane (Bernoullihypothesis), that large deflections are possible but the strains remainsmall and that the material is homogeneous and isotropic and behaveslinearly elastic. This results in the equations of motion of shearableand extensible rods (Timoshenko-beams). By neglection of shear deformationand of the rotational inertia of the cross-sections (assumptions thatcan be done in most technical applications) the equations of motionof Euler–Bernoulli-beams are derived in standard and concentratedform. The Euler–Bernoulli-beam equations contain the equations ofmotion of threads with zero bending and torsional stiffness. It isshown that the neglection of bending and torsional stiffness is onlyvalid if the tension is always positive. The second part of this paper[1] selects and develops appropriate numerical solution methods.The derived algorithms are used to solve problems from space and marineengineering.     

Non-linear Heat and Mass Transfer During Convective Drying of Kaolin Cylinder Under Non-steady Conditions

The self-consistent model of heat and mass transfer during convective drying of capillary porous media describing both the first and the second periods of drying is presented in Musielak (Wydawnictwo Politechniki Poznańskiej, seria Rozprawy, nr 386 (2004a); Chem. Process Eng. 25, 393–409 (2004b)). The results of simulations of processes in steady conditions are shown (Musielak Wydawnictwo Politechniki Poznańskiej, seria Rozprawy, nr 386 (2004a); Chem. Process Eng. 25, 393–409 (2004b)). The main aim of the present work is to compare experimental results with those from numerical simulations. Three convective drying processes have been performed experimentally. The first and the second periods of drying are considered, during which the humidity of air in the dryer changes due to evaporation. The first process is used to establish drying parameters, whereafter the two remaining processes are simulated. Good agreement between experimental and simulation results is found, both qualitative and quantitative.     

具有非线性homologous变形约束的桁架结构形态分析

研究了具有非线性homologous变形约束条件的桁架结构形态分析问题。在已有的线性homologous变形约束桁架形态分析的基础上,将结构的节点分成三类:homologous变形约束节点,形状可变节点和边界点。运用Moore-Penrose广义逆矩阵性质,将基础方程组解的存在条件表示为包含形状可变节点未知坐标的非线性方程组,为采用Newton-Raphson方法求解非线性方程组,对AA (A为任意矩阵,A 为A的Moore-Penrose广义逆矩阵)求偏导数,找到了满足保型要求的形态,给出的桁架算例说明了本文方法的有效性。     

Thermomechanics of the interface between a body and its environment

We formulate integral statements of force balance, energy balance, and entropy imbalance for an interface between a body and its environment. These statements account for interfacial energy, entropy, and stress but neglect the inertia of the interface. Our final results consist of boundary conditions describing thermomechanical interactions between the body and its environment. In their most general forms, these results are partial differential equations that account for dissipation and encompass as special cases Navier’s slip law, Newton’s law of cooling, and Kirchhoff’s law of radiation. When dissipation is neglected, our results reduce to the well-known zero-slip, free-surface, zero-shear, prescribed temperature, and flux-free conditions. Dedicated to James K. Knowles: teacher, colleague, friend     

Bending of Composite Plates under Static and Dynamic Loading

The stationary bending of a two-dimensional elastic system of joined rectangular plates with different mechanical properties and boundary conditions is studied. A technique for solving the corresponding problem is proposed. It is based on approximate approaches in combination with a generalization of the force method. It is established that the static strain state of the system is essentially dependent on the difference between the elastic moduli of the constituent plates. It is also shown that with certain boundary conditions, the dependence of the first resonant frequency on the relative position of plates along the contact line is nonmonotonic__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 1, pp. 77–84, January 2005.